17
11.4 Polarity Switch
These four latching switched allow 180 degree phase reversal of the signal
output for each band individually.
Refer to section 16
for more information.
11.5 Mono Low
Switch
When operating the
FDS-360
in the stereo 2-way mode, this switch will sum
together the signal information in bands 1 and 3 so that the outputs of these
bands are equal, regardless of input stereo image. This gives a mono low
signal feed which is often desirable for low frequency information.
Refer to
section 14.3
for more information regarding mono low linking.
11.6 Phase Control
These three controls will adjust the relative phase between adjacent band
outputs at the crossover region. The phase circuitry is programmed by the
frequency cards to give precise control regardless of the crossover frequency.
When these controls are used in conjunction with the polarity switch the
operator has a full 360 degree of adjustment.
Refer to section 16
for further
information.
Summary of Contents for FDS 360
