FOR TECHNICAL ASSISTANCE,
PLEASE CONTACT:
Remarks: Due to our policy of continual product development, we reserve
the right to amend the specifications of the mentioned products without
notice.
BT-72
REV1.0/MAY22
5.4 Temperature Measurement
6. MAINTENANCE
CAUTION
BEFORE ATTEMPTING BATTERY REMOVAL OR REPLACEMENT, DISCONNECT
EXTERNAL PROBES FROM AN ARTICLE UNDER TEST.
6.1 Fitting and replacing the battery
The Thermometer incorporates visual low battery indication as follows:
‘Battery OK’: Thermometer function normal
‘Battery Low’: battery needs to be replaced, Thermometer still
function normally
‘Battery Exhausted’: Thermometer does not function
When the ‘Low Battery’ icon indicates the battery is low, the battery should be recharged by
USB port.
Dispose of used battery promptly and keep away from children.
If the device is not used for a long time, turn the power off, remove and store the batteries in
a cool, dry place.
1.
2.
3.
6.2 Storage & Cleaning
Store the Thermometer at average room temperature. The sensor lens is the most delicate part
of the Thermometer. The lens should be kept clean at all times. Take care when cleaning the lens
using only a soft cloth or cotton swab with distilled water or medical alcohol, allowing the lens to
entirely dry before using the Thermometer. Do not submerge any part of the Thermometer.
7. ACCESSORIES
The accessories contained inside the packaging are the following:
English instruction manual
•
8. SERVICE
8.1 Limited Warranty Conditions
This Thermometer is guaranteed against any material fault or manufacturer’s defect under the
general conditions of sale. During the warranty period (12 months from shipment date), faulty
parts may be replaced, with the manufacturer reserving the right to repair or replace the product.
In returning the Thermometer to the after-sales service or a regional branch, the customer
pays the inward outward transporter. The delivery must be agreed upon in advance with the
consignee.
For delivery, indicate the reasons for returning it through an enclosed note as simple as possible.
Use only the original packing.
Any damage caused by shipment using NOT the original packaging will be charged in any case
to the consignor.
The manufacturer will not be responsible for any damage to persons or thing
The warranty does not apply to the following cases:
Accessories and batteries are not included in the warranty.
Unsuitable use of the Thermometer or combining the latter with incompatible Thermometer
or accessories.
Repairs resulting from incorrect shipping.
•
•
•
Repairs resulting from servicing carried out by a person not approved by the company.
•
Modifications to the Thermometer without explicit authorization from our technical
department.
•
Inappropriate applications are not provided for by the definition of the Thermometer or by the
instruction manual.
•
The contents of this manual may not be reproduced in any form whatsoever without the
manufacturer’s authorization.
8.2 Before calling Service
If the Thermometer should not work correctly, before contacting the DEALER OR THE SERVICE
CENTRE, check the battery condition, the test leads, etc., Change them if necessary.
If the Thermometer still does not work, check if your operating procedure agrees with the
description in this manual.
The thermal imager camera can measure from -20 ~ +350°C (-4 ~ +662°F) and
displays the thermal image and temperature. Furthermore, thermal images can be
saved to a Micro SD card.
Tool box
•
Micro SD card
•
Mini USB cable
•
