9
17. PITCH BEND BUTTONS
When 2 CD players are playing a CD, the pitch bend function allows the positioning of the bass beats to be matched after the pitch
has been matched. The pitch will automatically rise when the + button is pressed and return to the original pitch when it is released.
The pitch will drop while the - button is pressed. By changing the pitch in this way, the positioning of the beats can be matched.
3 functions :
-
In pause mode, this wheel is used to make frame to frame research.
-
During the playback :
•
In normal mode, the wheel is used like the pitch bend buttons
•
In scratch mode, this wheel is used to scratch like with a turntable ( touch the wheels in the central part ).
Note : In the normal mode ( when the wheel is used to adjust the speed of the track ) and if the hold button is light, the wheel will
operating like the pitch slider. To find back the normal speed of the track, push the pitch on/off button (12) two times.
18. WHEELS
3 functions :
-
In pause mode, this wheel is used to make frame to frame research.
-
During the playback :
•
In normal mode, the wheel is used like the pitch bend buttons
•
In scratch mode, this wheel is used to scratch like with a turntable ( touch the wheels in the central part ).
Note : In the normal mode ( when the wheel is used to adjust the speed of the track ) and if the hold button is light, the wheel will
operating like the pitch slider. To find back the normal speed of the track, push the pitch on/off button (12) two times.
19. DISC INDICATOR
This indicator lights when the CD deck is open or if there is no CD on the player.
This indicator is off when a CD is on the CD player.
REAR PANEL :
20. LINE OUT OUTPUT
The audio for each CD player is an output for these jacks. Connect to the line input of the mixer.
21. DIGITAL OUTPUT
These jacks are digital outputs for each CD players. Connect to the line input of the D/A Amplifier.
22. RELAY CONNECTOR
This connector is used to use RELAY function. To use this function , wire to cleving 200 in using the jack – jack (provide with the cd
player)
23. POWER SWITCH ( ON / OFF )
Press the power switch to turn the unit on. To switch the POWER off press the POWER switch again.
24. POWER SUPPLY SOCKET
Used to connect the AC mains power to the unit.
25. CD TRAY
FUNCTIONS :
Opening & closing the disc holder.
-
Switch the unit on. Push the OPEN / CLOSE button to open the disc holder.
-
You can’t open the disc holder when the unit is reading ( to avoid the read trouble ).
Push the START / PAUSE before pushing the OPEN / CLOSE button.
Loading discs
-
Take the disc by each sides and put it on the disc holder, then push the OPEN / CLOSE button to close the disc
holder. The number of tracks of the disc is displayed and the total time disc during 2 seconds. The CUE point is
automatically fixed at the starting point of the first track.
Note :
-
Don’t place objects or more than one disc on disc holder.
-
Don’t push the disc holder with your finger. It would damage it.
Selecting tracks.
-
Press SKIP button once to move to one higher or lower track.
-
Hold the SKIP button to change tracks continuously at a higher speed.
-
When a new track is selected during the playback, playback begins as soon as the skip search operation is
completed.
-
If the SKIP >>I button is pressed while the last track is playing, the first track is selected. In the same way, if the SKIP
I<< button is pressed while the first track is playing, the last track is selected.
