Converse 325 ~ 3rd Edition ~ 17th January ~ 4116
10
USING
To adjust the ringer tone
The ringer tone can be set to
High or Low.
Use the ringer tone switch on
the underside of your
Converse 325 to set the ringer
tone you want:
R1
for LOW or
R2
for HIGH.
To adjust the call volume
During a call, you can adjust
the volume of a call.
When using Handsfree:
Press the
VOL +
or
VOL -
button to increase or decrease
the volume.
One-Touch and Two-Touch
memories
You can store 20 telephone numbers in
your Converse 325. 10 in the One-Touch
memory and a further 10 in the
Two-Touch memory.
Please note that stored numbers can be
no longer than 21 digits.
To store a One-Touch number
Use the label to keep a note
of each One-Touch and
Two-Touch numbers.
Press the
Store
button.
Note
One-Touch memory buttons
6-10 (the bottom 5 buttons)
are pre-set with BT Select
Services numbers (see ‘Using
Select Services’). These can
be overwritten if you wish
by following the instructions
below.
RINGER
R1
R2
Note
The call indicator light will flash
regardless of the ringer setting chosen.
To adjust the ringer volume
There are 3 volume settings to
choose from: HI, LOW or OFF.
Use the ringer volume switch
on the underside of your
Converse 325 to set the volume
you want:
HI
,
LOW
or
OFF
.
When using the handset or a
headset:
Press the
Amplify
button.
Press the
VOL +
or
VOL -
button to increase or decrease
the volume.
HI
LOW
OFF
