9
Using your phone
Quickdial memories
You can store a further 10 telephone numbers in the Quickdial
memories.
There is a quickdial memory card located under the handset on
your BT Decor 1100 which can be used to keep a record of your
quickdial memory numbers / contact names. Lift the plastic
plate up and you can write on the label.
Please note that quickdial numbers can be a maximum of 32 digits long.
To store a number in the Quickdial memory
1. Lift the handset.
2. Press the
button. The red secrecy light will flash.
The Store button is located underneath the one-touch memory card. You will
need to remove the card and plastic plate before you can access it.
3. Using the keypad, enter a memory location number between 0
and 9 in which you want to store the number.
4. Enter the telephone number you want to store including the
area code.
5. Press the
button. You will hear a confirmation tone.
6. Replace the handset.
To dial a Quickdial number
1. Lift the handset and wait for the dial tone.
2. Press the
button.
3. Using the keypad, enter the memory location number between
0 and 9 in which the number is stored. The number is dialled
automatically.
To delete stored numbers
1. Lift the handset.
2. Press the
button. The red secrecy light will flash.
3. Press the memory location number (0-9) or the one-touch
memory button (1, 2 or 3) in which you have stored the number
you wish to delete.
4. Press the
button. You will hear a confirmation tone.
Store
Store
Store
Store
Store
If you need any assistance with your product, please visit
www.bt.com/producthelp
