background image

32

If you experience any problems, please call the Helpline on 

0870 242 6652*

Answer only

Callers hear an announcement but cannot leave a message.
The pre-recorded message is, “Hello, your call cannot be taken
at the moment, and you cannot leave a message, so please
call later.”

Select outgoing message

Set your machine to play the Answer & Record or Answer Only
outgoing message.

1. Keep pressing 

to scroll between the options for your

outgoing message, Answer only, Answer off or Answer and
record. When the Answer Only outgoing message
is set, the message counter shows 

A

O

.

Record your own outgoing message(s)

1. When in standby, press and hold 

. Speak your message

after the long beep. Speak clearly, close to the answering
machine base.

2. Press 

to end recording. Your message is played back. 

To re-record your message, repeat these steps.

Using the answering machine

If you set the outgoing message to

Answer only your caller cannot leave

a message.

If the answering machine is set to off,

the display shows 

––

.

Your own outgoing message can be up

to 1 minute long.

Summary of Contents for Graphite 1500























































Reviews: