background image

Getting started

6

WARNING

Do not place your BT Graphite 1500 in

the bathroom or other humid areas.

Handset range

Your BT Graphite 1500 has a range of

up to 300m outdoors when there is a

clear line of sight between the base

and the handset. When there is no

clear line of sight between the handset

and the base, e.g. the base is indoors

and the handset is either indoors or

outdoors, the range could be reduced

to 50m. Thick stone walls will severely

affect the range.

Signal strength

The  icon on your handset display

indicates when you are in range of

the base. When it flashes and you

hear a warning beep, you are out of

range and will need to move closer

to the base.

IMPORTANT

Do not connect the telephone line to

the telephone line wall socket until the

handset is fully charged. The base

station should be plugged into the

mains power socket at all times.

Location

You need to place your BT Graphite 1500 base within 3 metres
of a mains power socket and 2 metres of the telephone wall
socket so that the cables will reach.

Make sure it is at least 1 metre away from other electrical
appliances to avoid interference.

Your BT Graphite 1500 works by sending radio signals
between the handset and base. The strength of the signal
depends on where you position the base. Putting it as high as
possible can help to provide the best signal.

Connect the base to the mains power

1. Plug the mains power adaptor into the power socket on the

back of the base and plug the other end into the mains power
wall socket. The base will come on and beep and display 

00

.

It will default to Answer and record mode.

If you experience any problems, please call the Helpline on 

0870 242 6652*

Summary of Contents for Graphite 1500























































Reviews: