background image

1. Make sure that your computer has TCP/IP configured and bound to 

your Ethernet card.

2. Enable DHCP client support. This allows your computer to 

automatically obtain its IP address from the BT Inspiration 
Adv (which acts as a DHCP server). 

OR

If you do not want to use the BT Inspiration Adv as your 
DHCP server, make sure that the IP address assigned to your com-
puter is on the same IP network as the BT Inspiration Adv 
(192.168.1.0), and that its subnet mask is 255.255.255.0. A simple 
solution is to use the address 192.168.1.2 for your computer. You 
must also ensure that the BT Inspiration Adv is set as your 
default gateway and DNS server.

3. Restart your computer (if required) to activate your new settings.

4. Start your web browser (Netscape 3.01 or later, or Internet 

Explorer 4 or later).

5. Specify the address 192.168.1.1 and press Enter. (If you changed 

the address of the BT Inspiration Adv, enter the new 
address instead.)

6. Your web browser will load the ‘Log in’ page.

If you cannot load the Log in page, try to PING the BT Inspiration 
Adv with the command: PING 192.168.1.1.

If you receive a reply, your Web browser may not be configured 
properly. Make sure that:

• it is configured to use the LAN, and not a dial-up connection

• it is not set to use a proxy server

If you do not receive a reply, it is likely that your TCP/IP settings are 
incorrect, verify the settings you made in step 2.

7. On the ‘Log in’ page, enter your system password then click the 

‘Log In’ button.

8.  The BT Inspiration Adv displays the ‘Location’ page.

The first time you log in you must choose the country or region. Click 
‘OK’ after you have made your choice.

9. The Main Configuration menu is displayed.

10. Click ‘Internet wizard’. The BT Inspiration Adv displays the 

first page of the Internet wizard. Turn to Section 4, Step 8 to 
continue.

If you are using an operating system other than Windows 95/98/NT4, follow the steps in this section to configure your system so that it 
can communicate with the BT Inspiration Adv.

Using BT Inspiration Adv with non-Windows computers

D

8

227-112-1 BT

Summary of Contents for Inspiration Advantage +









Reviews: