PS
S5.3
5230
001
Version no
T-code
F-code
Section
C-code
SCR Component Checks
186
Service Manual
1997-04-15
To insert a terminal into the plug body.
Referring to Figure 2, orient the plug body as shown
with the latch up, and terminal locking lance up.
Check that the locking lance protrudes .030 to .060
inches (.8 to 1.5mm). If not, adjust the lance. Insert the
terminal into the plug body until it latches. A "CLICK"
sound will be heard when the terminal latches. Check
for correct latching by moving the wire gently - with a
push-pull motion.
12.3. Reference
“A” Plug
27694-00
“B” Plug
27702-02
Receptacle
AMP #102103-3 (Loose) AMP
#102099-5 (Reel, side-feed)
Crimp Tool
AMP #90274-2 (wire size, 18-22)
Removal Tool
AMP 91065-1
Terminal Lube
AMP #561232-1
Figure 2
Orient Plug
Check lance height
Insert Until
Check sound is heard
Check with Gentle
Push-pull motion
on the wire
Return
Summary of Contents for OE35
Page 2: ...Return ...
Page 10: ... BT Products 8 Table of Contents Return ...
Page 331: ...Return ...
