Using the answering machine
14
To check your outgoing
message
•
Press the
OUTGOING
MESSAGE
button. Your
Response 65 Caller Display
beeps and your outgoing
message is played back to you.
•
You will hear a beep.
•
Your Response 65 Caller Display
then returns to answer-on mode.
To delete your outgoing
message
You can delete your outgoing
message and return to your
Response 65 Caller Display’s pre-
recorded outgoing message.
•
Press the
OUTGOING
MESSAGE
button,You will hear
a beep. Your outgoing message
is played back to you.
•
While the message is playing,
press the
DELETE
button.
•
Your Response 65 Caller Display
beeps and the pre-recorded
outgoing message is played
back.
Your message is now replaced by
your Response 65 Caller Display’s
pre-recorded outgoing message.
•
You can now record your
outgoing message. Speak clearly
15 to 20 cm from the in-built
microphone. Make sure you hold
down the
OUTGOING MESSAGE
button while you record the
entire message.
•
When you have recorded your
message, release the
OUTGOING MESSAGE
button.
•
You will hear a beep.
•
Your Response 65 Caller Display
will automatically play back your
message, then beep to confirm
the recording.
•
Your Response 65 Caller Display
then returns to ANSWER ON.
•
The display shows ‘
0
’, or the
number of messages recorded.
To re-record your outgoing
message, repeat this procedure.
Your Outgoing Message may sound
something like this: ‘Hello, I’m
sorry I can’t take your call at
present. If you would like to leave a
message, please speak after the
tone.’
OUTGOING
MESSAGE
OUTGOING
MESSAGE
DELETE