background image

Help

22

PAYPHONE

Your caller is ringing from a
payphone.

INVALID

If your Response 65 Caller Display
does not recognise the information
contained within the caller display
message, it will display

INVALID

rather than a message which may
contain errors. This does not mean
there is a fault with your Response 65
Caller Display.

RINGBACK

The exchange is ringing to let you
know that a previously engaged
number is now free.

Your Response 65 Caller
Display does not receive the
caller display messages

In order for your Response 65 Caller
Display to receive and display
messages, you must subscribe to
the BT Caller Display Service. For
more information, call us on

Free

fone 0800

800 150

Is the handset of your
telephone on properly?

If so, check other extensions
around the house.

You do not understand some of
the Caller Display 
service messages

The messages you might receive
are as follows:

INT’L

International call, received from
outside the UK.

UNAVAILABLE

The caller’s exchange does not
provide a Caller Display service.

WITHHELD

The caller has stopped  their
number from being sent. (By
dialling 141 before dialling your
number.)

OPERATOR

The call has been connected via the
operator.

Summary of Contents for RESPONSE 65






























Reviews: