18
UNINST
ALLING
1.
Turn your PC off and remove the power cable.
2.
Removal of your PCI card is the reverse process of that outlined in
Section 3.2.
3.
Remember to replace the rear panel blanking plate that you removed
previously.
The software uninstall process for all versions of Windows is very similar.
1.
Open the Control Panel. This can be done from either clicking on
My
Computer
on the Desktop or Clicking on
Start
-
Settings
-
Control Panel
from the
Windows
button (normally on the bottom left corner of
the screen).
2.
Double-click on
Add/Remove Programs
. There may be up to three entries
seen in the list;
ISDN CAPI Port
,
Speedway PCI
and
Speedway!
(all will be
seen if complete
Speedway!
installation process has been followed).
3.
Click on specific entry in list to be removed and then click on
Add/Remove
button.
4.
Confirm uninstall by clicking
Yes
.
5.
You will then be requested to restart your PC. If you want to remove other
entries in the list click on the
Do not Restart
option and select another
entry. When all entries are uninstalled restart your PC.