background image

61

If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp

General information

  Within the 12 month guarantee period:

  If you experience difficulty using the product, prior to returning  

your product, please read the Help section beginning on page  
55 or contact the BT Stratus 1500 Helpdesk for assistance on 0808 
100 6556*. Additional answers to Frequently Asked Questions are 
available from www.bt.com/producthelp

  In the unlikely event of a defect occurring, the helpdesk will  

issue a Fault Reference Authorisation (FRA) number and instructions 
for replacement or repair. Please note you will need the FRA  
number before returning the product. This does not affect your 
statutory rights.

  Outside of the 12 month guarantee period:

  If your product needs repair after the guarantee period has ended, 

the repair must meet the approval requirements for connection to 
the telephone network. We suggest that you call our recommended 
repair agents Discount Communications Ltd on 0800 980 8999.

  Returning your phone

  If the Helpline is unable to remedy your problem they will issue a 

Fault Reference Authorisation number and ask you to return the 
product to your original place of purchase.  Where possible, pack  
the product in its original packaging. Please remember to include  
all parts, including the line cords, power supply units and the  
original batteries.

Technical information

  How many telephones can I have?

  All items of telephone equipment have a Ringer Equivalence 

Number (REN), which is used to calculate the number of items which 
may be connected to any one telephone line. Your BT Stratus 1500 
has a REN of 1.  A total REN of 4 is allowed. If the total REN of 4 is 
exceeded, the telephones may not ring. With different telephone 
types there is no guarantee of ringing, even when the REN is less 
than 4.

  Any additional handsets and chargers that you register should have a  

REN of 0.

  R&TTE

  This product is intended for use within the UK for connection to the 

public telephone network and compatible switchboards.

  This equipment complies with the essential requirements for the 

Radio Equipment and Telecommunications Terminal Equipment 
Directive 1999/5/EC.

  Declaration of Conformance

  Hereby, CCT declares that this BT Stratus 1500 is in compliance with 

the essential requirements and other relevant provisions of Directive 
1999/5/EC.

  If you would like a copy of the Declaration of Conformance, call the 

Helpline on 0808 100 6556*.

Summary of Contents for STRATUS 1500

































































Reviews: