66
BT Synergy 3205 SMS – Issue 2 – Edition 2 – 16.03.04 – 5980
General information
Dialling mode
1. Press
then scroll
to
SETUP
and press
.
2. Scroll
to
Dialling Mode
and press
.
3. Press
or
to select either
Tone
or
Pulse
and press
to confirm.
4. Press
and hold
the
button to return to standby.
Automatically insert a pause after access code
With some switchboards, you may be required to dial a pause after entering the
switchboard access code (e.g. 9) to enable you to get an outside line.
This feature automatically inserts a pause between the access code and the telephone
number you have entered in the phonebook. However, for this feature to work, you must
still enter the access code before the telephone number when storing the number in the
Phonebook.
1. Press
then scroll
to display
Setup
and press
.
2. Scroll
to display
PABX Setup
and press
.
3. Scroll
to
Pabx 1
and press
to display
PIN Code?
4. Enter the PIN (original code 0000) and press
.
5. Enter the switchboard access code (e.g. 9) and press
.
You can now choose the length of the pause – 3 or 5 seconds.
6. Scroll
to
Pause Setup
and press
.
5980 BT Synergy 3205 UG [2-2] 23/3/04 2:08 pm Page 66
