5.2 - Service electronics
90
TCT-2301 Service instructions
M2007/3en
©BTG 2004
pipe butt against each other (important for grounding). See fig 23 on page
29.
When everything is mounted and power switched on, information will be
shown on the display.
Fig 49 Changing the
electronics card
1 Screws for
upper cover (4x)
2 Screws for
lower cover (2x)
3 Connection pipe
4 Plastic nut
5 Display connection
6 12 V DC connection
7 Screws for electronics
card (13x)
8 Power supply
9 Screws for power
supply (4x)
10 85-240 V AC
connection
11 SPC-1000 connection
12 LEDs
13 External connection
blocks
4
5
7
11
12
13
2
3
1
8
6
10
9
Connect the optical
connection pipe carefully
as the card can easily be
damaged.
Hold the optical
connection part off the
card while the optical
connection pipe is
fastened.