background image

UTP video and 12V rx 4CH RJ45 

Model : 391893

-  Power supply input: 110V-230V AC.

-  Power supply output: 36V 100W.

-  Receive color video signal and power supply camera  

   up to 300M/1000FT (UTP cable).

-  Provide constant 4 x 12V 1A power supply for  

  remote camera (working with 391895).

-  Compatible with worldwide video formats including  

  PAL, NTSC. 

- Support at least U/UTP cat 5 cable.

-  Built-in surge & ESD protection.

-  Super interference Rejection.

UTP video and 12V rx 8CH RJ45 

Model : 391894

-  Power supply input: 110V-230V AC.

-  Power supply output: 36V 150W.

-  Receive color video signal and power supply camera  

  up to 300M/1000FT (UTP cable).

-  Provide constant 8 x 12V 1A power supply for  

  remote camera (working with 391895).

  Compatible with worldwide formats including PAL,  

 NTSC.

- Support at least U/UTP cat 5 cable.

-  Built-in surge & ESD protection.

-  Super interference Rejection.

UTP video and 12V tx 1CH RJ45

Model : 391895

-  Power supply output: 12V 12W.

-  Auto disconnect when failure happens and recoverable  

  after failure resolved.

-  Transmit color video signal and receive camera power  

  supply up to 300M/1000FT (working with 391893 or  

 391894).

-  Provide constant 12V 12W power supply for camera.

-  Compatible with worldwide formats including PAL,  

 NTSC. 

-  Built-in surge & ESD protection.

-  Super interference Rejection.

Specifications

Items

Parameters

391893

391894

391895

Function

Channel

4 channels

8 channels

1 channel

Transmission Distance

300 m ( approx 12W for each camera)

0 – 300 m

Video Properties

Video Connector

BNC – F

BNC – M

UTP Cable Connector

RJ-45

Compatible with

PAL, NTSC, SECAM

Signal Transmission Band

0 – 6 MHz

Interference Rejection

>60db

Power Properties

Voltage Input

110 - 230V~     50 - 60 Hz

20V – 36V DC

Power Supply Output

36V

12V DC - 1A

Power supply connector

5.5 DC-M jack

Protection

Surge Projection

2KV 10/700us Per IEC61000-4-5

ESD

Contact Discharge : 6000V - Air Discharge: 8000 V - IEC61000-4-2 1995

Reliability

MTBF

>10000 h

Physical Properties

Size (LWH)

280 x 180 x 66.8 mm

Body: 65 x 35 x 21 mm  

Wire length: 150 mm

Outer Shell Material

Iron Metal

ABS engineering plastic

Color

Black

N.W

2.1 Kg

2.3 Kg

44 g

Environmental

Operation Temperature

0°C – 55°C

Storage Temperature

-20°C – 88°C

Relative Humidity

0 – 95% (non-condensing)

Features

VIDEO & POWER RJ45 INPUTS

1

2

3

4

VIDEO OUTPUTS

100-240V~ /50-60Hz 

ON

OFF

POWER

8 Ports video&Power Server

POWER

ON

OFF

4 Ports Video&PowerSever

100-240V~ /50-60Hz 

1

2

3

4

5

6

7

8

VIDEO & POWER RJ45 INPUTS

VIDEO OUTPUTS

Summary of Contents for 391893













Reviews: