27
26
Living Now with Netatmo
Installation Manual
Procedure for connected devices
2. Press and hold down the reset pushbutton
The LED flashes green, then it goes off, then turns red.
Now release the pushbutton.
The LED flashes green, then turns red and then it goes off.
2. Press and hold down the reset pushbutton
The LED flashes blue, then it goes off, then turns red.
Now release the pushbutton.
The LED turns red steady.
K4003C – 3584C – K4411CM2, – K4027C – K4027CM2 – K4027C –
K4027CM2 – K4531C – KG/KW/KM4441AC – KG/KW/KM4441AC
Warning
: a short accidental pressure of the reset pushbutton, starts the association (green LEDs are ON).
Press quickly and at the same time the two keys of the 4570CW Master control to end it.
2
2
K4003CW – K4003DCW – 3577C wireless light control
or
K4027CW wireless shutter control