21
9.Apply a small blood drop to the
front edge of the test strip, and the
blood should be pulled into the
confirmation window before the
meter begins to count down.
Do not push your finger against the
test strip or try to apply a smeared
blood sample.
10.The meter will start counting
down for 5 seconds and your test
result will be displayed on the
screen. Remove the used test strip
by hand or by pushing the ejector
button. The meter will turn off and
the test result is stored auto-
matically.
Important:
1. Never reuse a test strip or a lancet. An “E_5” error
message will be displayed in the center of screen if a
used strip is inserted into the meter.
2. The used strip and lancet will contaminate, please
discard them according to your local ordinances.
3. The used meter should be treated as contaminated
that may carry a risk of infection during measurement.
The battery in this used meter should be removed and
the meter should be disposed in accordance with local
ordinances.
9
10
