22
11.
Recalling the Memory and
Viewing the Average
The test results for blood sample will be stored in the memory
automatically. The meter can store up to 500 of the most recent
test results. You can also view the average of test results for
various periods of 7, 14, 28, 60 and 90 days. The control
solution test results will not be stored in the memory.
(
Note:
Please make sure that you press C key when you
run a Control Solution test, so that the control test result
will not be added to the memory.)
A. Using the Meter Memory
1.
With meter off, press M key to turn on the meter. After
a brief full screen display, the meter will display the
total number of test data stored in memory. Then the
screen will display “001” as the sequential number of
the most recent test result in memory. The memorized
test data will be displayed next. If there is no memorized
result in the meter, “---” is displayed. The meter will turn
off after 60 seconds if no action is taken.
2.
The screen will display each of the memorized test data
in sequence. Press M and C key to review your test results
in the memory forwards and backwards.
3.T
o turn off the meter, press M key for 2 seconds, or the
meter will turn off automatically after 60 seconds if no
activity.
B. Recalling the Test Results from the Meter Memory
