6.Periodic Inspection/Maintenance
6.3 Periodic Inspection List
(Unit=Hour)
Maintenance
Daily
Every Every Every Every Every Every Every
Page
250
300
500 1,000 2,000 3,000 8,000
Check compressor oil level.
0
4-5
Drain separator receiver tank.
0
4·6
Check looseness in pipe connecting
0
4·7
part, and wear and tear of pipe.
Check oil, water, fuel and air leak.
0
4·11
Check functions of all instruments and
0
4·11
devices.
Change compressor oil.
0
First time
0
6·10
Change compressor oil filter.
0
0
6·11
First time
Clean strainer in the scavenging
0
6·11
orifice.
Clean and change air filter element.
0
0
6·9
(Clean)
(Change)
�
Clean outside of the oil cooler.
0
6·13
0
00
Change oil separator.
•
00
6·15
*•
s
Change nylon tubes.
6·15
0
Change o·ring of unloader.
*•
6·16
Change pressure regulator.
•
6-16
Check rubber hose.
*•
6·16
Check consumable parts of the
*•
6·17
auto-relief valve.
Check consumable parts of the
*•
6·17
vacuum relief valve.
Performance check of pressure control
•
6·18
valve.
Check and change o·ring and piston of
•
6·18
!Pressure control valve.
Inspect solenoid valve.( If it is
found good, it is possible to
•
continue to use it.)
Change oil seal and bearing.
•
Such items marked O shall be carried out by customers.
For the following items or clauses marked
e,
contact us directly or our distributors because they require
expert technical know ledge on them.
The items or parts marked
*
should be replaced every 2 years even if they are not in disorder within their
periodical maintenance interval because their materials will change or become degraded as time passes.
Also for the same reason. the parts marked
*
should be replaced every 3 years.
6-3
BTW Equipment Supply • www.btwequipmentsupply.com • ORDER PARTS ONLINE