8
9
Focus on active assistance mode:
10
Reset:
Reset chronometer and speed information by pressing and holding the button
11
Pedestrian assistance mode:
When you have to push your bike up a hill, this mode is
best so you can forget about the weight of the bike! Attention: this mode should not be
used when you’re on the bike. This mode starts and remains activated when the button
is pressed down.
The mode stops when pressure on the button is released.
12
Connection to USB socket (charge at 0.5 A).
You can charge an electronic device
(lamp or phone type) via the USB socket located below the control screen.
13
Recommended maintenance warning light:
Your power-assisted bike should be
serviced and checked over regularly . The appearance of the «Maintenance» light
reminds you, as on a car, of the need for a check-up after many kilometres of use (dis-
tance between two reminder points adjustable by the technical experts in Decathlon’s
workshops according to the condition of the bike).
Setting adjustment:
Long, simultaneous press on buttons
and
to open setting adjustment.
Short press on button
to validate and scroll through the different settings.
Short press on buttons
and
to scroll through the different settings options.
SETTING 1: Wheel circumference
SETTING 2: Tyre width
SETTING 3: Choice of units (Km= kilometres/ Mi= Miles)
* The accuracy of the speed read-out is +/- 2%.