1. Warnings
1. Warnings
If the
X80 Activator
is used to remotely operate an electrical or electromechanical
device, it is the responsibility of the user to ensure that such devices are operated in
a safe manner and to ensure that any necessary safety interlocks or warning signs
are in place.
Under certain circumstances, the
X80 Activator
may fail to operate properly, or may
operate at random times. It should never be considered a “fail-safe” device and
should never be used in an application where a failure to operate properly may result
in a risk of personal injury or loss of life.
Contains FCC ID:MCQ-XBEE09P The enclosed device complies with Part 15 of the
FCC Rules. Operation is subject to the following two conditions: (
i.
) this device may
not cause harmful interference and (
ii.
) this device must accept any interference
received, including interference that may cause undesired operation.
If the device is used with any antenna other than the one supplied, the system may
not comply with the FCC regulation Part 15.247, Operation within the license-free
band 902 – 928 MHz. Contact manufacturer regarding use of optional high-gain
antennas with the X Series wireless camera system.
To satisfy FCC RF exposure requirements for mobile transmitting devices, a
separation distance of 20 cm or more should be maintained between the antenna of
this device and persons during device operation. To ensure compliance, operations
at closer than this distance are not recommended. The antenna used for this
transmitter must not be co-located in conjunction with any other antenna or
transmitter.
X80 Activator User's Manual v1.2 3
