Bucktool DC30A, Instruction Manual

6

SAFETY

 GUIDELINES

DC30A

 damaged, have it repaired by a service facility before use. If the plug will not fit
 the outlet, have a proper outlet installed by a qualified electrician.

GROUNDED TOOLS

TOOLS WITH THREE PRONG PIUGS

3-Prong Plug and Outlet

1.  Tools marked with “Grounding Re quired” have a three wire cord and three 
     prong grounding plug. The plug must be connected to a properly grounded 
     outlet. If the tool should electrically malfunction or break down, grounding 
     provides a low resistance path to carry electricity away from the user, reducing
     the risk of electric shock. (See 3-Prong Plug and Outlet.)
2.  The grounding prong in the plug is connected through the green wire inside the
     cord to the grounding system in the tool. The green wire in the cord must be the 
     only wire connected to the tool’s grounding system and must never be attached 
     to an electrically “live” terminal. (See 3-Prong Plug and Outlet.)
3.  The tool must be plugged into an appropriate outlet, properly installed and 
     grounded in accordance with all codes and ordinances. The plug and outlet
     should look like those in the preceding illustration. (See 3-Prong Plug and Outlet.)