Bucktool DC30A, Instruction Manual

8

TOOL USE AND CARE

DC30A

1.  Use clamps (not included) or other practical ways to secure and support the

     workpiece to a stable platform. Holding the work by hand or against your

     body is unstable and may lead to loss of control.
2.  Do not force the tool. Use the cor rect tool for your application. The correct 

     tool will do the job better and safer at the rate for which it is designed.
3.  Do not use the power tool if the Power Switch does not turn it on or off. Any 

     tool that cannot be controlled with the Power Switch is dangerous and must

     be replaced.
4.  Disconnect the Power Cord Plug from the power source before making any

     adjustments, changing accessories, or storing the tool. Such preventive safety 

     measures reduce the risk of starting the tool accidentally.
5.  Store idle tools out of reach of chil dren and other untrained persons. Tools

     are dangerous in the hands of untrained users.
6.  Maintain tools with care. Keep cutting tools sharp and clean. Properly

     maintained tools with a sharp cutting edge are less likely to bind and are 

     easier to control. Do not use a damaged tool. Tag damaged tools “Do not 

     use” until repaired.
7.  Check for misalignment or binding of moving parts, breakage of parts, and 

     any other condition that may affect the tool’s operation. If damaged, have 

     the tool serviced before using. Many accidents are caused by poorly 

     maintained tools.

8.  Use only accessories that are recommended by the manufacturer for your 

     model. Accessories that may be suitable for one tool may become hazardous

     when used on another tool.

SAFETY

 GUIDELINES