now!Board™ User Manual 19
(Figure 31)
5.
The side button on the stylus is a right-click (Windows) or control-click (Mac) button. The now!Board
™
stylus can
control your PC similarly to a mouse.
Mouse Function
Stylus Action
Left click
Press down on the stylus tip.
Right click
(Windows)
Control click
(MAC)
Position the stylus tip over the object on the screen and press
the side button.
Note:
Do not press the side button when writing or calibrating.
6.
The green light inside the stylus is an indicator light.
•
Flashes intermittently – stylus is on
•
Flashes rapidly – low battery
•
Solid on – tip or side button is engaged
Using the Wand
Use the wand on uneven surfaces such as walls, projector screens, or any surface that may potentially be scratched.
1.
The wand requires 2 x 1.5 V (AAA) batteries. Follow the battery instructions on page 26.
2.
Be sure the projector is between 5' and 11' (1.5 m and 3.35 m) from the display surface. Be sure the camera is
8"–12" (20 cm–30 cm) behind the projector. The wand will not work consistently if the camera is more than 12'
(3.65 m) from the display surface.
3.
The camera needs to see the tip of the wand at all times.
Note:
there is no visible light in the tip of the wand.
Watch that your hand, body, or other objects in the room are not blocking the tip of the wand or the camera.
4.
Gently pull the tip to extend the wand to the desired length.
5.
Press and release the button on the wand to select icons from the toolbar. Press and hold the button when writing.
Note: there is no right-click/control-click functionality with the wand.
