Boiler block assembly
8
Logano GE515 - We reserve the right to make any changes due to technical modifications.
32
8.8.3 Installing the burner door
z
Insert a few drops of silicone adhesive every 15 to
20 cm into the packing grooves (Fig. 31,
[2]
) on the
front section (Fig. 31).
z
Insert the GP cord into the packing groove on the
front section. Position the butt ends of the packing
cord on the side of the section (Fig. 31,
[2]
).
At the factory, both hinge eyes are fitted to the r.h. side
of the burner door (Fig. 32,
[1]
and
[2]
). To convert to l.h.
hinges, remove the hinge eyes and fit them to the l.h.
side of the burner door.
z
Secure each hinge pin (r.h. fitting) with 2 x M12 × 55
to the front section (Fig. 31,
[1]
and
[3]
). Fit to the l.h.
side for l.h. hinges.
z
Secure the closure bars with leading edge for the
burner door (r.h. mounting) with 2 x M12 × 55 each to
the front section (Fig. 31,
[4]
and
[5]
). Fit likewise to
the r.h. side for l.h. mounting.
z
Hook the burner door with the hinge rings onto the
hinge pins.
Fig. 31 Installing the hinge hooks and the closure bars
1
2
3
4
5
Fig. 32 Hooking in the burner door
1
3
4
5
6
2
USER NOTE
z
Ensure that the leading edge of the
closure bars are located on the inside
of the boiler.
