Boiler block assembly
8
Logano GE515 - We reserve the right to make any changes due to technical modifications.
42
z
Push the upper rear boiler panel underneath the rear
boiler cover (Fig. 55,
[1]
) and secure with four self-
tapping screws from the rear on the side panels
(Fig. 55,
[2]
).
z
Insert the snap nuts into the l.h. and r.h. side panels
and into the rear boiler panel components (Fig. 56,
[1]
,
[3]
,
[4]
and
[8]
).
z
Hook the lower boiler panel sections on the left and
the right into the slots of the edge of the upper rear
boiler panel and the side panel (Fig. 56,
[5]
).
z
Secure the boiler rear panel components with self-
tapping screws to the side panels.
z
Secure the link plate (Fig. 56,
[2]
) below the flue
outlet on the rear boiler panel components using self-
tapping screws.
z
Secure the plastic cable glands either on the l.h. or
r.h. side of the upper rear boiler panel (Fig. 56,
[5]
and
[6]
).
Fig. 55 Installing the upper rear boiler panel
1
2
Fig. 56 Installing rear boiler panel components
1
2
3
7
6
5
4
8