background image

MOTOR IS NOT RESPONDING.

•  Battery in motor is depleted — Recharge with compatible AC adapter and check connection.
•  Transmitter battery is discharged — Replace battery.
•  Battery is inserted incorrectly into transmitter — Check battery polarity.
•  Radio interference/shielding — Ensure transmitter is positioned away from metal objects and the aerial on motor or receiver is kept straight 

and away from metal.

•  Receiver distance is too far from transmitter — Move transmitter to a closer position.
•  Power failure — Check power supply to motor is connected and active.
•  Incorrect wiring — Check that wiring is connected correctly (refer to motor installation instructions).

MOTOR BEEPS 10 TIMES WHEN IN USE.

•  Battery voltage is low  — Recharge with AC adapter.

CANNOT PROGRAM A SINGLE MOTOR (MULTIPLE MOTORS RESPOND).

•  Multiple motors are paired to the same channel

a. Always reserve an individual channel for programming functions.
b. System Best Practice - Provide an extra 15 channel remote in your multi motor projects, that provides individual control for each motor 

for programming purposes.

c. Place all other motors into sleep mode (ref to P1 function overview).

THE SHADE RAISES ON LOWERS UNEVENLY.

•  Check that the installation brackets are level and aligned. Shim the brackets, if necessary.

Shades are made of the highest quality materials for extended wear. If it is not damaged or exposed to a great deal of direct sunlight, it is not unrealistic 
to expect years of enjoyment with minimal care. Raising and lowering shades periodically helps reduce most natural dust accumulation.

Dusting:

 Regular light dusting with a feather duster is all the cleaning that is needed in most circumstances.

Note: 

Dual Shades should not be vacuumed or spot-cleaned.

10

     

Immediately remove this product if a cord longer than 22 cm or a loop 

exceeding 44 cm around becomes accessible.

 

Rev 7/21  Print 7/21

WARNING

RISQUE D’ÉTRANGLEMENT– 

Les enfants en bas âge 

MISE EN GARDE

peuvent s’étrangler 

avec des cordes. Enlevez imm

é

diatement ce produit si une 

corde mesurant plus de 22 cm devient accessible ou si le contour d’une boucle de 

plus de 44 cm devient accessible. 

STRANGULATION HAZARD – 
Young

 chidren can be strangled by cords.

 

TROUBLESHOOTING

CARE AND CLEANING

CHILD SAFETY

Summary of Contents for SMART HOME COLLECTION Dual Shades





















Reviews: