13
GB
Description of the warning sign (see Figure 1) on the
machine
1. Important! Read the operating instructions and
follow the warnings and safety instructions
2. Take care when the blades are rotating. Do not
put your hands or feet into openings when the
machine is running.
3. Important! Keep other persons and animals away
from the danger zone.
4. Important! Protect the machine from the damp
and never expose it to rain.
5. Important! Always wear safety goggles, ear
protectors, protective gloves and heavy-duty work
clothes!
6. Always set the ON/OFF switch to “0” and pull
the power plug out of the socket-outlet before
doing any work on the shredder, e.g. cleaning the
shredder and making adjustments, or if the
power cable becomes damaged.
Caution! The cutters contin
nue to run for a few seconds
after the motor is switched off.
3. Technical data
Voltage:
230 V
~
50 Hz
Power rating:
2500 W (S6-40%)
2000 W (S1)
Cutting unit idling speed
40 min
-1
Branch diameter:
max. 40 mm
LPA sound pressure level:
79 dB (A)
LWA sound power level:
91 dB (A)
Socket fusing
min. 16A
Weight: 26
kg
Operating mode S1 (continuous operation)
The machine can be continuously operated with the quot-
ed power output.
S6 (40%) stands for a duty cycle based on 4 minutes on-
load and 6 minutes off-load operation. Maximum power
consumption depends on the consistency of the material
being shredded.
4. Layout of the (Figure 1)
1 Funnel inlet
2 Motor protection switch
3 ON/OFF switch
4 Switch for selecting the direction of rotation
5 Integral mains plug
6 Knob for setting the counter blade
7 Chassis
8 Discharge opening
5. Proper use
This electric garden refuse shredder is designed only for
shredding organic garden waste. Place biologi-cally
degradable material, e.g. leaves, branches, dead flowers
etc., into the loading funnel inlet.
Collecting the shredded material
A container can be placed underneath the ejector
opening to catch the shredded material.
6. Before starting up
6.1 Assembly (Fig. 2)
앬
Take all the parts out of the packaging.
앬
Fit the chassis to the housing using the two lock nuts
and washers (item 2). Use the assembly tool provided
for this purpose.
앬
Fit the axle (item 3) to the chassis using the two M6 x
50 screws (item 4) and nuts (item 2). Fit washers here
too. Use the assembly tool provided for this purpose.
앬
Push the wheels (item 5) on to the axle.
앬
Secure the wheel cover (item 6) on the axle using a
hammer.
7. Starting up
7.1 ON/OFF switch (Fig. 1 / item 3)
앬
Press the green knob to switch on the shredder.
앬
Press the red knob to switch it off.
Important: The machine has a zero voltage switch. This
prevents the machine restarting unintentionally after a
power failure.
7.2 Switch for selecting the direction of rotation (Fig. 1 /
Item 4)
Important! The sw
witch for selecting the direction of
rotation can only be moved when the shredder is
switched off.
Po
osition “1”
The material is automatically drawn in by the blade and
shredded.
Position “0”
The blade rotates in the opposite direction to release
jammed material. After moving the selector switch to the
“0” position, press and hold the green knob of the
ON/OFF switch. The blade will start to rotate in the
opposite direction. As soon as you release the ON/OFF
BLH 2500_Budget_mehrspr 29.12.2005 10:09 Uhr Seite 13
Summary of Contents for BLH 2500
