ASSEMBLY INSTRUCTION
4
During works at heights, as well as while climbing and descending, there is a risk of falling. Follow
accident prevention rules and regulations strictly and use proper fall protection equipment.
While carrying out works related to the assembly of photovoltaic structures, your hand may get
crushed or injured on sharp edges. Wearing protective gloves is therefore recommended.
3. PRODUCTE USE
a. Maintenance
In order to ensure correct operation and a long useful time of the system, inspections should be carried
out on a yearly basis. Check whether the fastening screws and ordinary screws and bolts are tightened and in
the correct position.
Stepping on the structure and putting any other type of load on it is strictly prohibited.
Should you notice that any of the fastening components are loosened, secure the area around the
structure against unauthorised entry and perform a repair in compliance with OSH regulations and provisions of
the instructions.
b. Cleaning
In order to maintain the attractive appearance of the fastening structure, clean it regularly. Clean
components of the frame provide for a nicer look, longer durability and better functioning of the structure.
System components are best cleaned with water and sponge. However, neutral detergents may also be
used.
Do not use alkaline cleaning agents! The glass on the panels is sensitive to
alkaline substances.
4. PACKAGING, STORAGE, TRANSPORT
The products should be packed in an original BUDMAT package in a manner preventing the loss of any component
of the particular system. After receiving the delivery, please always check the product for its quality and possible lack of
components in the respective kit(s).
The vehicle transporting Magnelis-coated profiles should be adapted to this kind of transportation.
The loading, unloading and proper fastening of the goods for the time of transport should be made easy for the person
carrying out these activities
.
