ASSEMBLY INSTRUCTION
MONT
AŻU
3
GENERAL INFORMATION
FWD 2 structures are complete systems of free-standing, ground-mounted support structures for
photovoltaic panels manufactured in our own machine park. Each PV structure consists of components made of
high-quality steel with Magnelis ZM310 and ZM 410 coatings, and it comes with an essential set of screws, nuts,
clamps and washers.
This assembly instruction is intended for the Buyer/User to get familiar with the structure, its operating
principle, storage and transportation guidelines, and correct assembly of the components.
1. STRUCTURE VARIANTS
2x4
2x6
2. SAFETY INFORMATION
Photovoltaic structures should be assembled by experienced and properly equipped professional teams only.
During the assembly, use and repair of products covered by this instruction, generally applicable occupational
health and safety regulations should be followed. It is therefore, among others, necessary to:
Wear personal protective equipment such as helmet and other types of protective clothes
Use ladders, scaffoldings and electric lifting equipment with proper certificates confirming their
usability
Secure the area in which there is work in progress against unauthorised entry
Have a valid medical certificate for working at heights.
