Version: 010622
SUPERSLIDE INSTRUCTION MANUAL Page 18 of 19
QTY OF DÉTENTES
Sets the number of détentes used in the détented mode (default is 5 détentes).
MAX FWD SPEED
Adjusts the playback speed used when The Slide is moved to its highest position from 100% to 999% play
speed. The default is 500%.
MAX REV SPEED
Adjusts the playback speed used when The Slide is moved to its lowest position from -100% to -999%. The
default is -500%
MISCELLANEOUS MENU ITEMS
A submenu containing these items:
VERSION AND TEST
GPI ROLL DELAY
SET TIME OF DAY
LED BRIGHTNESS
MENU DISPLAY ANGLE
STATUS DISPLAY ANGLE
INITIALIZE UNIT
VERSION AND TEST
Displays the software version date and performs a test of the program PROM. If the PROM test fails, a
PROM FAILED! message appears along with a checksum error number; the program PROM needs
replacement. The unused stack space (MEM FREE:) is also displayed and should be a non-zero number, if
not, please call the factory. Tap any key to start the LED and keyboard test. All 24 LED indicators light and
characters are written to the STATUS display as each keyboard key is tapped. Turn the KNOB to end the
keyboard test.
GPI ROLL DELAY
Delays transmission to the VR300 of a play or variable play command when a GPI goes active. This feature
is used to add a delay to match the duration of a preset transition effect when a replay is taken on-air. The
default is zero or no delay.
SET TIME OF DAY
Sets the time of day clock used for time of day recording. This clock must be set whenever the
SUPERSLIDE has had a power interruption.
LED BRIGHTNESS
Adjusts the brightness of the 24 LED indicators. Turn the KNOB until the desired LED brightness is reached,
then tap any key.
MENU DISPLAY ANGLE
Adjusts the MENU display contrast to optimize for viewing angle.
STATUS DISPLAY ANGLE
Adjusts the STATUS display contrast to optimize for viewing angle.
