PS07569 Plasma 375 Plasma Cutter Kit Assembly & Operating Instructions Manual
2
GENERAL PRODUCT SPECIFICATIONS
SPECIFICATIONS
Single Phase 230V-60HZ
25A Max
Output 120V DC
Duty Cycle 35% at 40A
No-load Voltage 340V
Air Pressure 4.5 CFM@ 60 PSI
Cuts 3/8” Mild Steel, 1/4” Aluminum,
1/4” Stainless Steel, 1/4” Galvanized Metal,
1/8” Copper, 1/8” Brass
Working Air Pressure Range = 40-90 psi
Pilot Arc Feature Cuts Expanded Metal
IGBT Inverter Plasma Cutter With Thermal
Overload Protection & Built-in Gas Regulator
FEATURES:
Includes 18.5 Ft Cutting Torch
10 Ft Earth Cable With Clamp
3 Pieces Nozzle
3 Pieces Electrode
Insulated Gate Bipolar Transistor (A solid state switch device (with no moving parts) that is used in order
to allow power flow in the ON state and to stop flow when it is in the OFF state. Works by applying
voltage to a semiconductor component, therefore changing its properties to block or create an electrical
path)
This product contains chemicals known to the State of California to cause cancer
and birth efects or other reproductive harm.
KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE
REFERENCE.
READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
When unpacking, check to make sure all parts listed are included. If any parts are missing or broken,
please call Customer Service at 1-888-287-6981.
FOR CONSUMER USE ONLY – NOT FOR PROFESSIONAL USE
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Current
Setting
Gas Pressure
Display
Connector For Torch
Arc Starting Cable
Connector For
Cutting Torch
Handle
Gas Pressure
Adjustor
Connector For
Grounding Cable
