24
NAT
Configure network address translation settings here. This enables LAN-side devices to communicate with the Internet.
Internet - NAT (Router Mode Only)
Address Translation
Enable to use network address translation.
LAN
Configure LAN-side and DHCP server settings.
LAN - LAN
LAN-side IP Address
By default, the LAN-side IP address is 192.168.11.1 with subnet mask 255.255.255.0. You
may change it here.
DHCP Server
Enable or disable the DHCP server, which assigns LAN-side IP addresses automatically.
DHCP IP Address Pool
Configure the range of IP addresses to be assigned by the DHCP server and IP addresses
to be excluded from that range. Values from 1-256 may be entered.
LAN-side IP Address (For
IP Unnumbered)
Set an IP unnumbered LAN-side IP address.
Note:
A PC with a normal LAN-side IP address and a PC with an IP unnumbered IP
address cannot communicate with each other.
Advanced Settings
Check
Display
to display DHCP server advanced settings options.
Lease Period
Set the effective period for IP addresses assigned by the DHCP server. Up to 999 hours
may be entered.
Default Gateway
Set the default gateway IP address for the DHCP server to issue to clients.
DNS Servers
Set the DNS server IP address for the DHCP server to issue to clients.
WINS Server
Set the WINS server IP address for the DHCP server to issue to clients.
Domain Name
Set the domain name for the DHCP server to issue to clients. You may enter up to 64
alphanumerical characters, hyphens, and periods.