73
Saving and Restoring Settings with a Backup File
Once you have finished configuring your AirStation to your needs, you can save the current configuration to a backup
file. This file can be used to restore the AirStation’s settings when needed. For example, the AirStation will initialize its
settings after a hard reset. Instead of re-configuring the unit, simply use the backup file to restore its previous settings.
The backup file is not automatically updated when you make further AirStation configuration changes.
Save Settings to a Backup File
You can access Save settings by navigating to the
Admin
-
Reset / Reboot
.
1
On the
Reset / Reboot page
, select
Back up settings
.
2
Check
Use password
if you want to encrypt the backup file with a password. If you do, the system will ask for
the password when restoring settings with the backup file. The password may include up to 8 single-byte
alphanumeric characters and underscores (_).
3
Click
Execute
. The Save As dialog appears.
4
Click
OK
.
Once the file has been saved to your system, do not rename the backup file. If needed, you can put the file into another
folder.
