1
UK
Safety Tips
•
Position the appliance on a flat, stable surface.
•
When positioning the appliance, maintain a distance of 20cm (7 inches) between the appliance and
walls or other objects for ventilation. Increase this distance if the obstacle is a heat source.
•
A service agent/qualified technician should carry out installation and any repairs if required. Do not
remove any components or service panels on this product.
•
Consult Local and National Standards to comply with the following:
• Health and Safety at Work Legislation
• BS EN Codes of Practice
• Fire Precautions
• IEE Wiring Regulations
• Building Regulations
•
DO NOT immerse the Pie Warmer in water, or use jet/pressure washers to clean it.
•
Always switch off and disconnect the power supply to the appliance before cleaning.
•
Always allow the Pie Warmer to cool down before cleaning, maintaining or moving to avoid the risk of
burns.
•
DO NOT use the appliance for anything other than its intended use.
•
This appliance must only be used in accordance with these instructions and by persons competent to
do so.
•
This appliance is not suitable for use by children.
•
Keep all packaging away from children. Dispose of the packaging in accordance to the regulations of
local authorities.
•
If the power cord is damaged, it must be replaced by an BUFFALO agent or a recommended qualified
technician in order to avoid a hazard.
Introduction
Please take a few moments to carefully read through this manual. Correct maintenance and operation of
this machine will provide the best possible performance from your BUFFALO product.
Pack Contents
The following is included:
BUFFALO prides itself on quality and service, ensuring that at the time of packaging the contents are
supplied fully functional and free of damage.
Should you find any damage as a result of transit, please contact your BUFFALO dealer immediately.
•
Pie Warmer
•
Sliding glass door x 2
•
Glass display panel
•
Wire rack x 3
•
Element Guard
•
Water Reservoirl
Summary of Contents for GF454
Page 32: ...GF454_GF455_ML_A5_v2_20190627 ...