WHR-HP-GN User Manual
16
Chapter 3 Installation
5
Connect you computer to one of the AirStation’s LAN ports with the LAN cable.
2) connect
1) connect
LAN cable
Wireless Router
ᴥ
rear side
ᴦ
ÒÏÕÔÅÒ
ÐÏ×ÅÒ
ÉÎÔÅÒÎÅÔ
ÌÁÎ
ᴮ
ᴯ
ᴰ
ᴱ
ÏÎ
ÏÆÆ
ÁÕÔÏ
computer
ÏÆÆ
6
Turn on the AirStation, wait one minute, and then turn on your computer.
power outlet
Wireless Router
ᴥ
rear side
ᴦ
ÒÏÕÔÅÒ
ÐÏ×ÅÒ
ÉÎÔÅÒÎÅÔ
ÌÁÎ
ᴮ
ᴯ
ᴰ
ᴱ
ÏÎ
ÏÆÆ
ÁÕÔÏ
PC
ÏÎ
1) Connect the power supply
2) power on
7
Wait for a while, and then make sure that the AirStation’s LEDs are lit as described below:
POWER
Green light is on
SECURITY
Amber light is on
WIRELESS
Green light is on or blinking
ROUTER
Green light is on or off depending on your network
DIAG
Off
LAN
Green light is on or blinking
INTERNET
Green light is on or blinking
※
Refer to page 8 and 10 for LED locations and other details.
8
Launch a web browser. If the “home” setup screen is displayed, setup is complete.
If a user name and password screen is displayed, enter "
root
" (in lower case) for the user name,
leave the password blank, and click “
OK”
. Follow the instructions on the screen to complete
setup.
You’ve completed initial setup of your AirStation. Refer to Chapter 4 for advanced settings.