WHR-HP-GN User Manual
38
Chapter 4 Configuration
Parameter
Meaning
Initiates AOSS automatic wireless configuration. Click this, then
press or click the AOSS button on your AOSS-compatible wireless
client. Repeat for additional AOSS clients.
Click this button to disconnect AOSS connections.
Note: If AOSS connections are disconnected, the SSID and encryption
keys will be restored to their most recent settings before using AOSS.
Encryption Type of Exclusive SSID for
WEP
You may allow a separate SSID specifically for WEP connections. If
“
disabled
” is selected, then clients will not be able to connect with
WEP.
Advanced Encryption Level feature
Allow AOSS to make connections encrypted with WPA/WPA2-PSK-
mixed mode.
Exclusive SSID for WEP
Set a separate SSID and network segment specifically for WEP
connections. Devices connected with WEP will not be able
to communicate with devices connected using AES/TKIP. All
connected devices will be able to communicate with the internet.
AOSS Button on the AirStation Unit
Determine whether configure AOSS or not when the physical AOSS
button is pressed.
AOSS Client Information
*
Displays AOSS clients connected to the AirStation and information
of the devices which are wirelessly communicated.
AOSS Ethernet Converter
Information
*
* Only displayed if there are AOSS
Connections
Displays information about ethernet converters connected to the
AirStation via AOSS.
Current Security Information
* AOSS Connection only
Displays an encryption level, SSID, an encryption key configured by
AOSS.