7
The TeraStation’s Ethernet port will automatically adjust to use either a Crossover or Patch cable,
so you may connect the TeraStation to your network with either type of Ethernet cable. Buffalo
Technology.doesn’t.recommend.connecting.the.TeraStation.directly.to.a.PC.
Verify.that.the.
LINK/ACT LED
on the front of TeraStation is lit (see page 6’s picture). If it’s lit, go to
page 8 to continue setting up TeraStation. If the
LINK/ACT LED
is still not lit, try the suggestions
below to verify that you’re not suffering from common setup problems.
Having problems? Make sure that:
•.
the TeraStation and the router, hub or switch are both powered on,
•.
the Ethernet cable is securely plugged in at both ends, and
•.
the Ethernet cable is not damaged. Verify this by trying a different Ethernet cable.
.
If problems persist, contact our 24/7 technical support at
(866) 75-610
.(USA.&.Canada.only)...
Technical Support in Europe is available between the hours of 9am - 6pm (GMT) Monday through
Thursday and 9am-4:30 pm (GMT) Friday for this product. Customers in Europe can obtain
Technical Support using the following information: Email:
helpdesk@buffalo-technology.ie
| Web:
www.buffalo-technology.com
TeraStation Quick Setup