63
9
Click
Create Volume
.
10
Enter a volume name, volume description, volume, and size (if you enabled LVM), then click
OK
.
The volume size that you specify here can be changed later. To change the volume size, refer to the "Expanding
Volume Sizes" section below.
11
The "Confirm Operation" screen will open. Enter the confirmation number, then click
OK
.
12
Click
OK
, then
Close
.
Creating an iSCSI volume is finished.
Note:
If you click
Disable Connection
for the selected volume in
Drives
-
iSCSI
in Settings, the selected iSCSI
volume can no longer be accessed. If you click
Enable Connection
, the volume will become accessible from the
iSCSI initiator software.
Connecting or Disconnecting Volumes
There are two methods to connect or disconnect volumes. One uses the pre-installed Microsoft iSCSI Initiator on
Windows; the other uses Buffalo iSCSI Connection Tool. The method to use Buffalo iSCSI Connection Tool is available
only to customers with TS5000 series TeraStations.
Note:
By default, the IP address of the TeraStation is automatically assigned from a DHCP server. However, in
this case, if you turn off and restart the TeraStation, the IP address may be changed and the volumes on the
TeraStation may not be accessible. To avoid changing the IP address unexpectedly, using a fixed IP address for
the TeraStation is recommended.
Using Microsoft iSCSI Initiator
Connecting Volumes
To connect a volume using Microsoft iSCSI Initiator from a Windows computer, follow the procedure below.
Note:
Do not shut down the TeraStation while connecting to an iSCSI volume. It may cause unexpected data
erasure. Make sure all connections are disconnected before shutdown.
1
In Windows, navigate to
Control Panel
-
Administrative Tools
-
iSCSI Initiator
.
Summary of Contents for TeraStation WSS 5000
