background image

8

Buffalo Technology

Technical Support

Buffalo Technology offers  Toll-Free Technical Support 24 hours a day, 7 days a week 

for this product. Customers in the United States and Canada can obtain technical 

support using the following information:

◗ 

 

Online Help

    Available on the AirNavigator CD enclosed with your purchase.  

◗ 

Web

                 www.buffalotech.com/wireless 

◗ 

E-mail

              info@buffalotech.com 

◗ 

Telephone

      866-752-6210

                               (USA & Canada only)
The constantly evolving state of wireless products and operating systems requires 

Buffalo Technology  to  occasionally  release  updated  software  to  take  advantage  of 

new technologies and to comply with industry standards. For the most recent software, 

firmware, driver, and technical whitepaper releases available, please visit the Buffalo 

Technology website.

FCC Compliance Statement - 

See owners manual for complete statement.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two 

conditions: (1) This device may not cause harmful interference, and (2) this device must accept 

any interference received, including interference that may cause undesired operation.

R&TTE Compliance Statement - 

See owners manual for complete statement.

This equipment complies with all the requirements of the DIRECTIVE 1999/5/EC OF THE 

EUROPEAN  PARLIAMENT AND THE  COUNCIL  of  9  March  1999  on  radio  equipment 

and telecommunication terminal Equipment and the mutual recognition of their conformity 

(R&TTE).

Copyright © 2003 Buffalo Technology, Inc.  All Rights Reserved.
Buffalo Technology (USA) Inc., is part of MELCO INC., the global manufacturers of IT peripherals, including memory, networking, 
and multimedia products, inside many of the world’s computers.  All trademarks are property of their respective own-

*54 Mbps is the IEEE 802.11g standard theoretical maximum data transfer rate.  Actual wireless network throughput is limited by environmental and system factors and will be less.

Summary of Contents for WLA-G54









Reviews: