https://www.phoenixcontact.com/au/products/2903331
01/07/2020 Page 2 / 11
Relay Module - RIF-1-RPT-LV-230AC/2X21 - 2903331
Technical data
Ambient conditions
Ambient temperature (operation)
-40 °C ... 50 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Degree of protection
IP20 (Relay base)
RT III (Relay)
Coil side
Nominal input voltage U
N
230 V AC
Input voltage range in reference to U
N
see diagram
Mains frequency
50/60 Hz
Typical input current at U
N
6 mA
Typical response time
3 ms ... 12 ms
Typical release time range
3 ms ... 20 ms
Coil voltage
230 V AC
Protective circuit
Varistor
Operating voltage display
Yellow LED
Power dissipation for nominal condition
1.38 W
Contact side
Contact type
2 PDT
Type of switch contact
Single contact
Contact material
AgNi
Maximum switching voltage
250 V AC/DC
Minimum switching voltage
5 V (at 10 mA)
Min. switching current
10 mA (At 5 V)
Maximum inrush current
12 A (20 ms, N/O contact)
Limiting continuous current
8 A (see diagram)
Interrupting rating (ohmic load) max.
192 W (at 24 V DC)
124 W (at 48 V DC)
108 W (at 60 V DC)
52 W (at 110 V DC)
48 W (at 220 V DC)
2500 VA (for 250 V AC)
Switching capacity
2 A (at 24 V, DC13)
0.2 A (at 250 V, DC13)
3 A (at 24 V, AC15)
3 A (at 120 V, AC15)
3 A (at 250 V, AC15)
General
Test voltage relay winding/relay contact
4 kV
rms
(50 Hz, 1 min.)
Test voltage PDT/PDT
2.5 kV
rms
(50 Hz, 1 min.)
Operating mode
100% operating factor
