0330
p. 1/12
www.burkert.com
Technical data
Available housing materials
Brass
Stainless steel (1.4401)
PP (Polypropylene)
PVDF (Polyvinylfluoride)
Port
connection
G ¼; NPT ¼;
(RC ¼ and G ⅛ on request)
Seal material
EDPM / FKM / FFKM / NBR
Medium
for NBR
EPDM
for FKM
for FFKM
Neutral medium such as compressed air, town gas, wa-
ter, hydraulic oil, oils and fats without additives, oxygen
Alkalis, acids to medium concentrations, alkaline wash-
ing and bleaching lyes
Oxydizing acids and substances, hot oils with additives,
salt solutions, waste gases, oxygen
aggressive mediums, hot air, hot oils
All Materials - For more exact info. please refer to our chemical resistance chart
Medium temperature
for body material
brass or stainless steel
NBR
0 to +80 °C
EPDM
-30 to +90 °C
FKM
0 to +90 °C
FFKM
+5 to +90 °C
Medium temperature
for body material
PP or PVDF
NBR
0 to +80 °C
EPDM
-30 to +80 °C
FKM
0 to +80 °C
FFKM
+5 to +80 °C
Viscosity
Max. 37 mm²/s
Ambient temperature
max. +55 °C
Voltages
24 V 50 Hz; 110 V 50 Hz; 230 V 50 Hz; 120 V 60 Hz;
240 V 60 Hz; 12 V DC; 24 V DC;
(further voltages on request)
Voltage tolerance
±10 %
Duty cycle for brass and
stainless steel.
100 %
Duty cycle for PP and PVDF
40 % ED (60 % intermittent operation) in 30min for 8 W
version 100 % ED for 5 W version
continued
The 0330 valve is a direct-acting, media-
separated pivoted armature valve. It is
available in 3/2 and 2/2 way versions. As
a 3/2 way version, it can be used as a dis-
tributor or mixing valve. Various diaphragm
material combinations and methods of
operation are available depending on the
application. The standard brass housing
satisfies all European drinking water require-
ments. Stainless steel (316), PVDF, and
polypropylene housing versions complete
the offering. The solenoid coils are moulded
with a chemically resistant epoxy. The 0330
is equipped with manual override for com-
missioning and testing. For reduced energy
requirements all coils can be delivered with
electronic power reduction or as an impulse
version. The switching status can be indi-
cated with position feedback as a binary
or NAMUR signal. In combination with a
plug in accordance with DIN EN 17301-803
Form A, the valves satisfy protection class
IP65/67 – in combination with a stainless
steel or plastic housing NEMA 250 Cat. 4X.
• Direct-acting, media-separated valve with diameter of up to DN5
• Maintenance-free pivoted armature technology
• Vibration-proof, block screwed coil system
• Suitable for aggressive alkaline and acidic solutions
• Service-friendly, robust manual operation
• Explosion proof versions
Content:
Standard version
Technical data
p. 1
Additional options
p. 4
Dimensions & Pin Assignment
p. 5
Ordering chart
p. 6
Explosion proof version
Technical data
p. 7
Additional options
p. 9
Dimensions & Pin Assignment
p. 10
Ordering chart
p. 11
Direct-acting 2/2 or 3/2 way pivoted
armature valve
