CU-EMA+
5.3 Description of menu functions
5.3.1 Main menu
CU-EMA+ (C.EMA) cooler
Display →
CEMA
This will take you to the cooler target temperature and tolerance range setting (alarm threshold).
Global setting (ToP Settings)
Display →
toP
This menu is used to configure the global cooler settings.
Peristaltic Pump
Display →
PuMP
Switching the peristaltic pump on and off.
Parameter range:
NoP
,
oFF
Factory setting:
NoP
Note:
Status switches, "
PuMP
" flashes.
Sample gas pump (not applicable)
Display →
6AS.P
The sample gas pump can be manually activated for 30 seconds. This process can be repeated sev-
eral times.
Parameter range:
Yes
,
no
Factory setting:
no
Heat exchanger material selection
Display →
h.chn
Heat exchanger material selection
Parameter range:
tS
(Steel),
t6
(Glass),
tU
(PVDF)
Factory setting:
tS
(cooler without heat exchanger), or respective material per configuration
Exit main menu
Display →
E
Selecting this will return you to display mode.
15
Bühler Technologies GmbH
BE440029 ◦ 10/2020
