bühler
Allied Front-End Loader
- 10 -
P4094
PRE – OPERATION
WARNING
The tractor must be equipped with an approved Roll
over Protection Structure (ROPS) and safety belts to help prevent personal injury
or death caused by tractor roll over.
CAUTION
Maximum rated loader capacity may exceed tractor
rating. Load restrictions or reduction in hydraulic operating pressure may be
required for safe operation.
Rops:
Do not exceed the manufacturer’s rating for maximum gross vehicle
weight. Refer to the
Tractor Manual
or the
ROPS Serial Decal
for rating. Do not
alter or modify the ROPS structure.
Tractor Tires:
Space rear tires as recommended by the tractor manufacturer.
Tire inflation and capacity must meet or exceed additional weight of loader,
attachment and payload. Maximize width for high lift applications. Tread width
must not exceed maximum width as recommended in the
Mounting Kit Listing.
WARNING
Add rear ballast to help prevent personal injury or death
caused by tractor roll over.
Rear Ballast:
Rear ballast is required to ensure 25% of gross vehicle weight is
transferred to the rear axle. Attachment and load must be included as weight.
Adequate rear weights are required to counterbalance maximum loader capacity
and safe loader operation. Weight can be added as rear tire liquid (calcium
solution), rear wheel weights, rear axle weights and/or three point hitch mounted
ballast or implement. Ballasting will vary with tractor and loader attachment.
Refer to the
Tractor Manual
for recommended ballasting.
Summary of Contents for 2595
