- 11 -
3.2.2 Adjustment of Control Parameters in the Second Operating Phase
Press the UP and DOWN keys (11/10) simultaneously for at least 4 seconds to access a list of control
parameters (beginning with P1). Pressing the UP key scans the list upwards and the DOWN key
downwards.
The value of the corresponding parameter is displayed when the SET key (9) is pressed. Press the UP
or DOWN key in addition in order to set the value. Release all the keys to store the new value. The
original settings are restored if no key is pressed for more than 60 seconds.
P19 Keyboard Disabling
Keyboard disabling enables the operating keys to be locked. In the locked position it is not possible to
change the set value with the keys. If an attempt is made to adjust the set value despite keyboard
disabling, the display shows the message "-".
Parameters
Functional specification
Setting range
Default set-
ting
P1
Lowering set point
not adjustable
-
P2
Waiting time until lowered
not adjustable
-
P11
Elapsed time indicator,
"Units digit"
P12
Elapsed time indicator,
"Thousands digit"
P13
Number of releases,
"Units digit"
P14
Number of releases
"Thousands digit"
P19
Keyboard disabled
(Set point adjustment disabled
0: Not disabled
1: Disabled
0
2SHUDWLQJ,QVWUXFWLRQV
Summary of Contents for HB 230E
