Model 02E/4C connector locations
Learn about connector locations on rack-mounted models.
Notes:
The 02E/4C server supports 12X DDR and PCIe cable connector locations as follows:
v
The card installed in the C1 slot can contain either two 12X DDR cable ports for I/O expansion unit
support or one PCIe cable port for PCIe storage enclosure support. The C1 slot cannot provide both
12X DDR and PCIe cable ports.
v
The card installed in the C8 slot can contain either two 12X DDR cable ports for I/O expansion unit
support or one PCIe cable port for PCIe storage enclosure support. The C8 slot cannot provide both
12X DDR and PCIe cable ports.
v
The port card type installed in the C1 slot can differ from the port card type installed in the C8 slot.
v
The location and use of the SAS port are unaffected by the types of ports found in the C1 and C8 slots.
v
The 02E/4C server supports one GX adapter, which can be installed in the C1 slot.
Figure 19. Model 02E/4B connector locations on a stand-alone model
20
Power Systems: Installing the 58/02 and 58/77 expansion units
Summary of Contents for ESCALA Power7 5802
