User Guide
148
www.bull.com
Caution
Do not tilt the processor or shift it into place, doing so may dam-
age the sensitive contacts.
5.
Check that the orientation notches and the connection 1 indicator are properly
fitted to the socket body.
6.
Close the soket:
- Close the load plate.
- Press gently on the load plate and engage the load lever.
- Secure the load lever under its retention tab.
7.
Remove the heatsink from its packaging materials.
8.
Place the heatsink on the processor socket.
- Ensure that the fan cable(s) are on the closest side to the fan(s) header(s)
on the motherboard.
- Align the screws with the screwholes on the motherboard.
- Make sure that the heatsink is completely level with the motherboard.
Caution
Check the following:
■
No cables are trapped or interfere with the screws.
■
The screws are perpendicular to the heatsink.
9.
Secure the heatsink:
- Hold the heatsink to prevent it from tilting, and tighten the screws.
10.
Connect the fan cable(s) to the header(s) on the motherboard.
11.
Secure the excess cable with a tie-wrap to ensure that the cable does not
interfere with fan operation or make contact with other components.
12.
Close the server chassis.
Summary of Contents for NovaScale R410 E1
