Clean Breathable Air Source Supplying Grade “D”
or Higher Air Quality
(See Breathing Air Requirements on page 7.)
Component Concept
CC20 airline respirators
Bullard CC20 Series airline respirators consist of five components (Figure 1); all must be present and properly
assembled to constitute a complete NIOSH approved respirator.
➀
respirator Hood:
Available in a variety of styles (including loose-fitting facepiece) and in two Tychem
®
-
based materials.
20TJ
Tychem QC basic hood and headband suspension
20TP
Tychem QC basic hood and headband, with solvent-resistant polyester lens
20TIC
Tychem QC hood with inner bib and headband
20TPC Tychem QC hood with inner bib and headband, with solvent-resistant polyester lens
20TICH* Tychem QC hood with inner bib for use with head protection
20TICS Tychem QC hood with taped and sealed seams, with inner bib, long outer bib, and headband suspension
20SIC
Tychem SL hood with taped and sealed seams, with inner bib, long outer bib, and headband suspension
20SICH* Tychem SL hood with taped and sealed seams, with inner bib and long outer bib for use with head protection
20LFM Tychem QC loose-fitting facepiece hood, facial seal, sewn-in suspension, lightweight breathig tube, small/
medium (approx. head sizes 6
1
⁄
2
- 7)
20LFL
Tychem QC loose-fitting facepiece hood, facial seal, sewn-in suspension, lightweight breathig tube,
large (approx. head sizes 7
1
/
8
- 8)
20LF2S
Tychem QC narrow profile loose-fitting facepiece hood, facial seal, sewn-in suspension, lightweight breathing
tube, small (approx. head sizes 6 - 7)
20LF2M Tychem QC narrow profile loose-fitting facepiece hood, facial seal, sewn-in suspension, lightweight breathing
tube, medium (approx. head sizes 7 - 8)
20LF2L Tychem QC narrow profile loose-fitting facepiece hood, facial seal, sewn-in suspension, lightweight breathing
tube, large (approx. head sizes 8 - 9)
* Requires one of the following Bullard hard hat models: C30, C30R, S51 or S51R.
Note
Optional accessories include 20LCL lens covers, 20RT ratchet headband suspension, 20NC or ES42 chin
strap.
➁
Headband Suspension or Head Protection:
Hard hat models C30, C30R, S51 or S51R or suspension
models 20TG and 20RT. 20LFM, 20LFL, 20LF2S, 20LF2M AND 20LF2L have sewn-in elastic headband
suspensions.
➂
Breathing tube for CC20 respirators:
20BT, RTBT
For 20TJ, 20TIC, 20TICH, 20TICS, 20SIC, and 20SICH
20LFBT
For 20LFM, 20LFL, 20LF2S, 20LF2M, 20LF2L
20LFBTXL
For 20LFM, 20LFL, 20LF2S, 20LF2M, 20LF2L
20LFBTXS
For 20LFM, 20LFL, 20LF2S, 20LF2M, 20LF2L
Clamp
Figure 1
Inner Bib
Belt
➀
Respirator Hood or
loose-fitting facepiece hood
➁
Headband Suspension or Hard Hat
➂
Breathing Tube
➄
Air Supply Hose
Clamp
➃
Flow Control Device
➃
Flow Control Device:
Connects respirator hood to air supply hose. Available with a choice of quick-disconnect fittings, constant
or adjustable airflow control and optional climate control devices.
Flow Control Device*
Without Climate Control Devices
With Climate Control Devices
Cold only
Hot/Cold
Constant
adjustable
Part
N
o.
F30
F30B
F30S
F31
F32
F33
F34
F35
F35B
F35S
F37
F40
F40B
F40S
F41
F42
F43
F44
F47
AC100030
AC100030B
AC100030S
AC100031
AC100032
AC100033
AC100034
AC100035B
AC100037
Frigitron 2000
Frigitron 2000B
Frigitron 2000S
DC5040
DC5040B
DC5040S
DC5041
DC5042
DC4043
DC5044
DC5047
HC240030
HC240030B
HC240030S
HC240031
HC240032
HC240033
HC240034
HC240035B
HC240037
CC20 Component
Concept
4
* All flow control devices require the 20BT breathing tube to constitute complete breathing tube assemblies. Breathing tube must be purchased
separately.
➄
air Supply Hose:
Connects breathing tube to air source supplying clean breathable air.
Hose for High Pressure Hose for Low Pressure
Compressed air Source ambient air Pump
V5
V10
V20
3/8" Coiled I.D. Hose
3/8" I.D. Hose
1/2" I.D. Hose
V5 Starter/Extension Hose
469 Starter Hose
V20 Starter/Extension Hose
545 Extension Hose
Available in 25 and 50 foot lengths
with a variety of 1/4" and 1/2" quick-
disconnect fitting styles and materials.
See parts list (page 18) for details.
Available in 25, 50, and 100 foot lengths
with a variety of 1/4" quick-disconnect fitting
styles and materials. See parts list (page 18)
for details.
Available in 50 and 100 foot lengths with
1/2" quick-disconnect Industrial Interchange
fittings. See parts list (page 18) for details.
4
