Bullard EVA Series User Manual Download

Page: 24 / 25

Ordering Information

Blower Assemblies

EVA1

Blower unit only

EVA2

Blower unit, battery and charger, belt

EVA3

Blower unit, battery and belt

Replacement Batteries and Chargers

EVASMC

Quick charger (1 port)

EVAGC

Table top gang charger for EVABAT1 (6 ports)

EVABAT1

Lithium Polymer Battery Pack (black)

Replacement Cartridges

PAPRFC3

HE (6 per box)

PAPRFC4

OV/AG/HE (6 per box)

PAPRFC5

AM/FM/MA/AG/HE (6 per box)

Respirator Hoods

Single bib hood, for use with headband suspension*

20TJ/20TJT

Tychem 2000 (QC) 20RT headband suspension

20TJN/20TJNT

Tychem 2000 (QC) No headband suspension

Double bib hood for use with headband suspension*

20TIC/20TICT

Tychem 2000 (QC) 20RT headband suspension

20TICN/20TICNT Tychem 2000 (QC) No headband suspension
20TICS/20TICST

Tychem 2000 (QC) 20RT headband suspension, taped and sealed seams

20TICSN/20TICSNT Tychem 2000 (QC) No headband suspension, taped and sealed seams
20SIC/20SICT

Tychem 4000 (SL) 20RT headband suspension, taped and sealed seams

20SICN/20SICNT

Tychem 4000 (SL) No headband suspension, taped and sealed seams

20SICV/20SICVT

Tychem 4000 (SL) 20RT headband suspension, taped and sealed seams, PVC lens

20SICVN/20SICVNT Tychem 4000 (SL) No headband suspension, taped and sealed seams, PVC lens

Double bib hood for use with Bullard hard hat*

20TICH/20TICHT

Tychem 2000 (QC) Hard hat not included

20SICH/20SICHT

Tychem 4000 (SL) Hard hat not included, taped and sealed seams

20SICVH/20SICVHT Tychem 4000 (SL) Hard hat not included, taped and sealed seams, PVC lens

Double bib grinding hood for use with Bullard hard hat or suspension*

GRH/GRHT

Nomex, Hard hat not included

Loose fitting facepieces with sewn-in suspension

20LFXL

Tychem 2000 (QC), Extra Large

20LFL

Tychem 2000 (QC), Large

20LFM

Tychem 2000 (QC) , Medium

20LF2S

Tychem 2000 (QC), Small, narrow profile

20LF2M

Tychem 2000 (QC), Medium, narrow profile

20LF2S

Tychem 2000 (QC), Large, narrow profile

Double bib hood for use without a headband suspension*

RT1/RT1T

Tychem 2000 (QC), Inflatable Neck Collar

RT2/RT2T

Tychem 4000 (SL), Inflatable Neck Collar

RT3/RT3T

Tychem 2000 (QC), Sport Neck Collar

RT4/RT4T

Tychem 4000 (SL), Sport Neck Collar

Accessory Items for Hoods

20LCL

Mylar lens covers, CC20 Series (25/pkg)

RTLC

Mylar lens covers, RT Series (25/pkg)

MB1

Outer lens, GRH Series (10/pkg)

20LC

Mylar lens covers, GRH Series (25/pkg)

Headband Suspensions and Hard Hats

20TG

Standard headband suspension

20RT

Sure-Lock® ratchet headband suspension

30WHP

Hard hat with standard suspension, white

30WHR

Hard hat with ratchet suspension, white

51WHP

Hard hat with standard suspension, white

51WHR

Hard hat with ratchet suspension, white

Accessories for Headbands Suspension and Hard Hats

RS6PC

Standard replacement suspension for 30WHP hard hat

RS6RC

Replacement ratchet suspension for 30WHR hard hat

RS4PC

Standard replacement suspension for 51WHP hard hat

RS4RC

Replacement ratchet suspension for 51WHR hard hat

20NC

Chinstrap for 20TG and 20RT headband suspension

ES42

Chinstrap for C30 and S51 hard hats

Replacement Parts and Accessories

EVABELT1

Replacement belt

EVABELT2

Vinyl replacement belt

EVAEXT1

Extension belt kit

PAPRSUSP1

PAPR suspenders (1 pair)

PA1AFI

Air flow indicator

PAHBT

Powered air hood breathing tube assembly; standard length

PAHBTXS

Powered air hood breathing tube assembly; short length

PAHBTXL

Powered air hood breathing tube assembly; long length

PA1BT

Hood breathing tube assembly; includes tube and clamp; standard length

PA1BTXS

Hood breathing tube assembly; includes tube and clamp; short length

PA1BTXL

Hood breathing tube assembly; includes tube and clamp; long length

PA20LFBT

Loose fitting facepiece breathing tube assembly; standard length

PA20LFBTXS

Loose fitting facepiece breathing tube assembly; short length

PA20LFBTXL

Loose fitting facepiece breathing tube assembly; long length

PA1BTS

Breathing tube/cartridge seal

S18051

Breathing tube clamp (10/pack)

EVA Series Powered Air-Purifying Respirator

Blower Assembly User Manual

dering Inf

ormation

www.bullard.com

* “T” Suffix designates thread connection

Summary of Contents for EVA Series


























Search results

Summary of Contents for EVA Series

Reviews:

Related manuals for EVA Series

Brands by name

Popular brands

Bullard EVA Series, User Manual

Search results

Summary of Contents for EVA Series

Reviews:

Related manuals for EVA Series

Brands by name

Popular brands